편집 역사가 짧은 문서 목록

  1. 4,201부터 #4,250까지의 범위에서 50개의 결과가 아래에 보입니다.

(이전 50개 | 다음 50개) (20 | 50 | 100 | 250 | 500) 보기

  1. 기준변위량(Reference displacement)‏‎ (판 1개)
  2. 잠공(Orifice)‏‎ (판 1개)
  3. 모멘트 골조방식(Moment- resisting frame system)‏‎ (판 1개)
  4. 골재(Aggregate)‏‎ (판 1개)
  5. 연계교통정보시설(Information facilities for intermodal transportation)‏‎ (판 1개)
  6. 푸리에진폭(Fourier amplitude)‏‎ (판 1개)
  7. 접촉면(Faying surface)‏‎ (판 1개)
  8. 세그멘탈 시공(Segmental construction)‏‎ (판 1개)
  9. 가상하중(Notional load)‏‎ (판 1개)
  10. 지진위험지도 (=지진재해 지도)(Seismic hazard map)‏‎ (판 1개)
  11. 감지장치 (센서)(Sensor)‏‎ (판 1개)
  12. 소요(요구) 강도(Required strength)‏‎ (판 1개)
  13. 단기허용응력(Short term allowable stress)‏‎ (판 1개)
  14. 파일 임피던스(Pile impedance)‏‎ (판 1개)
  15. 급탕관(Domestic hot water supply pipe)‏‎ (판 1개)
  16. 달기틀(Hanging scaffold frame)‏‎ (판 1개)
  17. 투수 콘크리트(Porous concrete)‏‎ (판 1개)
  18. 도포량(Spread)‏‎ (판 1개)
  19. 유도수로(Induced waterway)‏‎ (판 1개)
  20. 침하(Settling)‏‎ (판 1개)
  21. 횡지지부재(Lateral support member)‏‎ (판 1개)
  22. 부골조(Subframe)‏‎ (판 1개)
  23. 전체링크 회전각(Rotation of shear link)‏‎ (판 1개)
  24. 공동구 본체(Utility tunnel structure)‏‎ (판 1개)
  25. 코너비드(Corner bead)‏‎ (판 1개)
  26. 비커스경도(Vickers hardness)‏‎ (판 1개)
  27. 중간대(Middle strip)‏‎ (판 1개)
  28. 병행식(竝行式)(Parallel method)‏‎ (판 1개)
  29. 무브먼트줄눈(Movement joint)‏‎ (판 1개)
  30. 벤토나이트 시트(Bentonite sheet)‏‎ (판 1개)
  31. 프리스트레스트 콘크리트(Prestressed concrete)‏‎ (판 1개)
  32. 서지(Surge)‏‎ (판 1개)
  33. 접지극(Earth bar, Drop bar, Ground rod)‏‎ (판 1개)
  34. 프리텐셔닝(Pre-tensioning)‏‎ (판 1개)
  35. 연성기초(Flexible foundation)‏‎ (판 1개)
  36. 세정 밸브(Flush valve)‏‎ (판 1개)
  37. 용락(Burn-through)‏‎ (판 1개)
  38. 활하중 합성(Composite action for live load)‏‎ (판 1개)
  39. 배수 통기설비(Drainage, Waste and vent system, Dwv system)‏‎ (판 1개)
  40. 모재(Parent material)‏‎ (판 1개)
  41. 순수장치(Pure water apparatus, Feed water treatment)‏‎ (판 1개)
  42. 대기전력 차단스위치(Standby power shutoff switch)‏‎ (판 1개)
  43. 내화보드(Fireproof board, Fire resistive board)‏‎ (판 1개)
  44. 혼합 폐기물(Mixed waste)‏‎ (판 1개)
  45. 확산계수(Diffusion coefficient)‏‎ (판 1개)
  46. 요구전단 벽길이(Required shear wall length)‏‎ (판 1개)
  47. 안전영역(Safety zone)‏‎ (판 1개)
  48. 보(Weir)‏‎ (판 1개)
  49. 재단도(Cutting pattern)‏‎ (판 1개)
  50. 접지압(Contact pressure)‏‎ (판 1개)

(이전 50개 | 다음 50개) (20 | 50 | 100 | 250 | 500) 보기