오래된 문서 목록

  1. 3,151부터 #3,200까지의 범위에서 50개의 결과가 아래에 보입니다.

(이전 50개 | 다음 50개) (20 | 50 | 100 | 250 | 500) 보기

  1. K영역(K-area)‏‎ (2022년 9월 26일 (월) 17:21)
  2. SN강재(Sn steel)‏‎ (2022년 9월 26일 (월) 17:21)
  3. V형가새골조(V-braced frame)‏‎ (2022년 9월 26일 (월) 17:21)
  4. X형가새골조(X-braced frame)‏‎ (2022년 9월 26일 (월) 17:21)
  5. Y형가새골조(Y-braced frame)‏‎ (2022년 9월 26일 (월) 17:21)
  6. 가새(Brace)‏‎ (2022년 9월 26일 (월) 17:21)
  7. 가새실험체(Brace test specimen)‏‎ (2022년 9월 26일 (월) 17:21)
  8. 가우징(Gouging)‏‎ (2022년 9월 26일 (월) 17:21)
  9. 강재코어(Steel core)‏‎ (2022년 9월 26일 (월) 17:21)
  10. 건물사용그룹(Use of buildings)‏‎ (2022년 9월 26일 (월) 17:21)
  11. 고성능강(High performance steel)‏‎ (2022년 9월 26일 (월) 17:21)
  12. 고정용 철근(Restraining bar)‏‎ (2022년 9월 26일 (월) 17:21)
  13. 구속판요소(Stiffened element)‏‎ (2022년 9월 26일 (월) 17:21)
  14. 구조요소(Structural element)‏‎ (2022년 9월 26일 (월) 17:21)
  15. 구조용강재(Structural steel)‏‎ (2022년 9월 26일 (월) 17:21)
  16. 구조해석(Structural analysis)‏‎ (2022년 9월 26일 (월) 17:21)
  17. 극저항복점강(Ultra-low yield strength steel)‏‎ (2022년 9월 26일 (월) 17:21)
  18. 극한강도(Ultimate strength)‏‎ (2022년 9월 26일 (월) 17:21)
  19. 금속아크용접(Metal arc welding)‏‎ (2022년 9월 26일 (월) 17:21)
  20. 기둥곡선(Column curve)‏‎ (2022년 9월 26일 (월) 17:21)
  21. 기둥주각부(Column bases)‏‎ (2022년 9월 26일 (월) 17:21)
  22. 끼움재, 끼움판(Filler)‏‎ (2022년 9월 26일 (월) 17:21)
  23. 내풍구조(Wind- resistant structure)‏‎ (2022년 9월 26일 (월) 17:21)
  24. 내화시간(Fire endurance time)‏‎ (2022년 9월 26일 (월) 17:21)
  25. 냉간성형(Cold-forming)‏‎ (2022년 9월 26일 (월) 17:21)
  26. 네킹(Necking)‏‎ (2022년 9월 26일 (월) 17:21)
  27. 노출형합성보(Unencased composite beam)‏‎ (2022년 9월 26일 (월) 17:21)
  28. 단부패널(End panel)‏‎ (2022년 9월 26일 (월) 17:21)
  29. 대각스티프너(Diagonal stiffener)‏‎ (2022년 9월 26일 (월) 17:21)
  30. 대주축휨(Major principal axis bending)‏‎ (2022년 9월 26일 (월) 17:21)
  31. 뒤틀림(Warping)‏‎ (2022년 9월 26일 (월) 17:21)
  32. 뒤틀림파단(Distortional failure)‏‎ (2022년 9월 26일 (월) 17:21)
  33. 뒷댐판(Backing bar)‏‎ (2022년 9월 26일 (월) 17:21)
  34. 링크중간웨브스티프너(Link intermediate web stiffener)‏‎ (2022년 9월 26일 (월) 17:21)
  35. 마찰접합부(Slip critical connection)‏‎ (2022년 9월 26일 (월) 17:21)
  36. 맞댐용접(Butt welding)‏‎ (2022년 9월 26일 (월) 17:21)
  37. 맞춤지압 스티프너(Fitted bearing stiffener)‏‎ (2022년 9월 26일 (월) 17:21)
  38. 메탈터치이음(Metal touch joint)‏‎ (2022년 9월 26일 (월) 17:21)
  39. 면내불안정한계상태(Limit state of in-plane instability)‏‎ (2022년 9월 26일 (월) 17:21)
  40. 면외좌굴 (또는 휨- 비틀림좌굴)한계상태(Limit state of out-of-plane buckling)‏‎ (2022년 9월 26일 (월) 17:21)
  41. 면진(Base isolation, Seismic isolation)‏‎ (2022년 9월 26일 (월) 17:21)
  42. 모멘트 연성골조(Ductile moment frame)‏‎ (2022년 9월 26일 (월) 17:21)
  43. 미끄러짐(Slip)‏‎ (2022년 9월 26일 (월) 17:21)
  44. 밀착조임볼트(Snug- tightened bolt)‏‎ (2022년 9월 26일 (월) 17:21)
  45. 밀착조 임접합부(Snug- tightened joint)‏‎ (2022년 9월 26일 (월) 17:21)
  46. 반강접합성접합부(Partially restrained composite connection)‏‎ (2022년 9월 26일 (월) 17:21)
  47. 반응수정계수(Response modification factor)‏‎ (2022년 9월 26일 (월) 17:21)
  48. 변단면재(Member of non-uniform section)‏‎ (2022년 9월 26일 (월) 17:21)
  49. 변형도경화(Strain hardening)‏‎ (2022년 9월 26일 (월) 17:21)
  50. 변형도적합법(Strain compatibility method)‏‎ (2022년 9월 26일 (월) 17:21)

(이전 50개 | 다음 50개) (20 | 50 | 100 | 250 | 500) 보기